Asics Zeus bitmain AntMiner S5

Bitcoin Wiki

Zeus bitmain AntMiner S5


Antminer S5

Just over a year ago, Bitmain released its ground-breaking Antminer S1 to the market. Miners no longer had to sacrifice space, noise levels and hashing power in order to mine. The S1 became the staple of the home miner, before being upgraded to the Antminer S3 7 months later.

Chip Specifications: BM1384

Bitmain�s 3rd generation Bitcoin mining ASIC, the BM1384 provides significant improvements over the previous BM1382 chip. Hashrate per mm2 at voltage 0.75V has been increased over 20% while reducing power consumption by 30%. This improvement is the result of months of hard work and investment in the Bitcoin ecosystem.


Building upon the foundation from the S1 and S3, the Antminer S5 retains the same small form factor of previous miners, but, with the more efficient BM1384 chips. The S5 uses 1 fan for quieter home operation and features multiple improvements over the strong S3 design.

Antminer S5 Inner
  • Hash Rate: 1155 GH/s �5%
  • Power Consumption: 590 W (at the wall)
  • Power Efficiency: 0.51 J/GH (at the wall)
  • Rated Voltage: 12V
  • Dimensions: 298 mm x 137 mm x 155 mm
  • Cooling: 1x 12038 fan
  • Operating Conditions: 0 �C to 35 �C
  • Certified By: FCC / CE
  • Network Connection: Ethernet

  • Notes
    • 1. Power consumption figures vary with your PSU�s efficiency, the ambient operating temperature and the accuracy of the power meter.
    • 2. PSU: A power supply unit is not included, and you will need to provide an ATX PSU. There are 4 PCI-e connectors for +12V DC input and all four are required. Do not connect more than one PSU to the same hashing board.
    • 3. When better power efficiency is needed in the future due to higher network difficulties, you may want to buy some special PSUs 9V DC with more than 10A output, which will allow you to have a 0.2J/GH mining efficiency, but at lower hashing speed.

    A New Cooling Solution:

    Heat will be dissipated from the top of the chips, which are powered in a chain style design on the PCB. This PCB layout concentrates the heat onto one side of the board, making heat diffusion efficient.

    Antminer S5 Inner

    Two customized aluminium heat sinks draw all the heat to the middle of the miner, and allow the use of just one fan to keep the S5 cool and quiet.

    Antminer S5 Inner

    Miner Experience Revolution � Manage your miner with ease Miner status monitoring Pool configuration modification Firmware upgrade Share administrative privilege over the web

    Antminer S5 Inner

    If you find this information helpful, please don't hesitate to donate:
    Bitcoin address: 199qweKqSzryPJsVi5n3iazuM8nLDFXBvo
    Dogecoin adres: D5cFbKHSJwmL3V7TVM84dL2EAf35SAV7Di
    Litecoin adres: LcXzbhN88EUAc44b8YYt5gD6Q3PPf2buxQ

    or donate directly

    Comment with your Facebook account